Welcome to contact +8613721698712



Location:Home - News Center

How to reduce the risk of self explosion of tempered glass

Time:2018-05-18 11:29:49 Hits:783 次 Source:Luoyang Shencheng Glass Technology Co., Ltd

The tempered glass has the characteristics of high wind resistance, heat and heat and impact. Even after the breakage, it is also a uniform small particle, the knife like angle left after the broken glass. Even so, the tempered glass produced by the tempered furnace still has 3/1000 self detonate rate. In addition to the quality of the tempered glass, the rigor of the installation is also an important factor in the safety. The following technical personnel of Luoyang Shen Cheng Glass Technology Co., Ltd. will give you a detailed description of how to reduce the risk of self toughening of tempered glass.


1. Characteristics of tempered glass
1, safety: if the glass is broken, the debris will be similar to the honeycomb shaped small obtuse particles, which will not cause human injury.
2. High strength: the impact strength of tempered glass of the same thickness is 3~6 times that of ordinary glass, and the bending strength is 3~6 times that of ordinary glass.
3, thermal stability: tempered glass has very strong thermal stability, the temperature difference is 3 times that of ordinary glass, and it can withstand the temperature difference of 200 degrees Celsius.


Two. How to reduce the risk of self explosion of tempered glass
1. Select high quality tempered glass
Steel glass requirements to ensure that the product must have 3C certification marks, and when wearing polarizing sunglasses to see glass, the tempered glass should be colored striped spots, and with the naked eye will have blue spots on the side; also pay attention to the degree of tempered glass, its smoothness is not as smooth as ordinary glass, it is a sense of concave and convex, there will be a certain length over there will be certain Radians.
2. Put on the explosion-proof film
The toughened glass in the shower room will not bring explosion-proof film to its own. In order to prevent the glass from flatting when it detonations, it is necessary to choose the explosion-proof film which is certified by the international window Association and with the qualification of production safety membrane when choosing the explosion-proof membrane.


3. Focus on the protection of the corner of the glass
The middle part of tempered glass is the most solid, and the four corners will be relatively weak. If the cracks occur, it is easy to smash the whole glass. Have you noticed that the safety hammers marked on the windows of the buses are located on the sides of the glass, which is the characteristic of tempered glass.
4, avoid sharp objects scratching
Although tempered glass has high strength, there are also weaknesses, for fear of scratching and bumping by sharp objects. Because the contact area of the sharp object is very small, the contact point has greater pressure on the glass, causing the glass to be slightly cracked by a great external force.


Luoyang Shen Cheng Glass Technology Co., Ltd. is newly developed and made of small tempered equipment. It is cheap, time saving, electricity saving and labor saving are very suitable for the friends of the cabinet industry. We always adhere to good faith and help our customers


18939008535 / 0379-61117177




Suhutuo Industry Zone, Wangcheng Bus Lane, Luoyang ,P.R. China

Copyright © 2019   Luoyang Shencheng Glass Technology Co., Ltd      SITEXML   Technical Support:Shangxian