How the glass tempering furnace is tempered glass

The so-called physical steel method is to heat the glass to close to the softening temperature of the glass, and then make it cool quickly to increase the mechanical strength and thermal stability of the glass production method. Physical toughening methods can be divided into liquid medium tempering, gas medium tempering, particle toughening, and fog tempering. Liquid medium toughening, namely liquid cooling, is to heat the glass to a point of softening and to put it in a quench tank filled with...

Analysis of the situation and causes of tempering glass produced by tempering furnace

The following is the toughening furnace production of tempered glass usually encountered circumstances and cause analysis.(1) if the glass is out of the furnace, the glass breaks in the hot cooling time in the wind grid. This indicates that the heating temperature is too low or the heating time is too short, which causes the residual stress in the original piece to be completely removed, or the glass surface temperature is uneven to break the glass, if the glass burst in the cooling stage, it is...

Abnormal problems occurred in the production of tempering furnace and treatment methods

We often encounter many problems in the production of tempering furnace. Today we summarize these common problems and solutions, hoping to be of use to everyone.(1) the glass cracking in the wind grille in the productionThe a producers found that the glass in the wind gate should immediately take the tight stop button of the wind gate control switch to avoid the cinder cut off by the wind gate roll.B after the wind gate is blown, the upper wind grid is opened or raised, and the residual glass sl...

Luoyang tempering furnace manufacturer specializes in the production of glass tempering furnace

How to select the glass furnace, many customers will have many questions about the product of the tempering furnace, and at the same time, there are many things that do not know when choosing the manufacturer, especially on the characteristics of the products and different kinds of different uses. The main components of the toughening furnace accessories are the roller table, the roller table, the wind grid roller table, the heating furnace and the air supply system. Workshop drawing of Luoyang ...

Luoyang steel furnace equipment which is good

Luoyang Shen Cheng Glass Technology Co., Ltd. mainly operates: glass processing equipment, glass tempering equipment production, installation, technical service and relocation and transformation of the project. The new toughening equipment developed by Luoyang toughening furnace equipment factory is cheap, time-saving, electricity saving and labor-saving, and is very suitable for the friends in the cabinet industry. We always adhere to integrity and benefit customers, insist on using their own s...

How to choose a steel furnace accessories manufacturer

How to select manufacturers, many customers have a lot of questions about the steel furnace accessories products, and at the same time, there are many things that do not know when choosing the manufacturer, especially on the characteristics of the products and different kinds of different uses. Next, the toughening furnace manufacturers will give you a brief introduction:The main components of the toughening furnace accessories are the roller table, the roller table, the wind grid roller table, ...